U LINE

“setting new standards.”

 

High Definition Large Scale Line Array.

 •   Transducers  LF: 2x 15" ND Cone 4" voice coil
   MF: 4x 6.5" ND Cone
   HF: 4x 1.75" ND Ring diaphragm
   
 •   SPL max  148dB
   
 •   Dispersion  H: 75°
   V: 2°
   
 •   Bandwidth  50-20.000Hz ±3dB
   
 •   Weight  82kg | 181 lbs

U LINE extends the KS AUDIO program with a system that meets the requirements of highest sound quality and easiest handling. The quality of the audio performance exceeds almost all the systems available on the market.

The system consists of two 15” speakers, four 6.5” mid-ran- ge drivers and four high-frequency drivers with 1 3⁄4” ring diaphragm. All components are equipped with the strongest neodymium magnets. Both the midrange and high- frequency ranges operate via cylindrical waveguides. The principle was developed by KS AUDIO and already shows its outstanding qualities in the P LINE.

The combination of the individual elements into a line array and the therefore required pre-correction were already fundamentally researched by KS AUDIO during the deve- lopment of the T LINE and successfully implemented for its other line arrays. The result is a software that, after the input of array length (number of elements) and curving (angle to the next element), calculates the equalization for the entire system and transfers it to the DSP’s of the system control- lers. In this way, the user has an immediately ready-to-use line array with optimum transmission qualities.

A special feature is the new fly-ware. It requires no exter- nal components, can be easily and securely prepared on the ground and then lifted and locked in position into the required angle. Thus a single person is able to mount and dismount the array completely.

The cabinet is made of multi-layered, waterproof glued birch multiplex and has a structured polyurethane coating. A steel grille, covered with acoustic fleece, protects the high-quality components.

The amplifier for the U LINE is the KS AUDIO TA 4D, whose 4 amplifier channels are switched in 1-channel tri-amp mode with woofer bridge operation. The load on a TA 4D is two U LINE modules.

The cradle allows an array with 16 elements which only weighs 1.5 tons including the dolly.

The U LINE is a large high-end public address system, which, because of its conception, enables arrays of almost infinite capacity. Whether in arenas or open-air, it enables concerts with outstanding sound quality. The combination with the exceptional T SUB in a cardioid array leaves nothing to be desired, even in the low frequency range.

On the back there is storage for lockpins as well as the SpeakON inputs. The U LINE can be connected with both NL4 and NL8 connectors.

On the back there is storage for lockpins as well as the SpeakON inputs. The U LINE can be connected with both NL4 and NL8 connectors.

Applications

 

Large-scale touring sound reinforcement for outdoor festivals, stadia, arenas and concert halls

Premium fixed installations in concert halls, theatres and sports arenas

Related products.

 
TA 4D - 4 Channel FIRTEC™ DSP controlled amplifier

TA 4D - 4 Channel FIRTEC™ DSP controlled amplifier

U SUB - Double 18” Hybrid Subwoofer

U SUB - Double 18” Hybrid Subwoofer

T SUB - Eight 10” Band-pass Infra Subwoofer

T SUB - Eight 10” Band-pass Infra Subwoofer

P SUB - Double 18” Precision Subwoofer

T LINE - Double 12” and triple 1.75” Line Array

T LINE - Double 12” and triple 1.75” Line Array